Area of application
Facade paint for external thermal insulation composite systems: permeable to water vapour, impermeable to driving rain and with strong protection against algae and fungi.
Preparation
For all mineral substrates such as concrete, masonry, levelling compounds, cement and lime plaster. Also suitable for adhesive silicate, dispersion silicate and dispersion plasters as well as old coats of paint. The substrate must be dry, clean, sound, absorbent and free of dust and grease. Remove loose material and poorly adhering coats of paint from the substrate. Prime highly absorbent, sanding and chalking substrates with baufan Deep Primer LF. If in doubt, apply a test coat. Always apply a deep-penetrating primer for first-time facade coatings. Repair cracks, holes and unevenness with a suitable baufan levelling compound.
Processing
Stir well before use and apply with a roller, brush, paintbrush, flat brush or suitable spraying equipment. As a primer, the paint can be diluted with max. 5 % water; as a top coat, apply undiluted after the first coat of paint has dried. When coating larger areas, work wet-on-wet to avoid build-up. Clean tools with water immediately after use. Drying time: approx. 6-8 hours under normal conditions (+20 °C, 65% relative humidity, moderately absorbent substrate); longer drying time in unfavourable conditions. Tinting: With suitable universal tinting concentrates or full-tone and tinting paints (up to max. 10% addition, without impairing the physical properties of the overall coating. It is essential to ensure light and weather fastness). Notes on airless spray application: Spray angle: 50° Nozzle: 0.023 - 0.027 Spray pressure: 120 - 180 bar Stir well before use and apply with a roller, brush, paintbrush, flat brush or suitable spraying equipment. As a primer, the paint can be diluted with max. 5 % water; as a top coat, apply undiluted after the first coat of paint has dried. When coating larger areas, work wet-on-wet to avoid build-up. Clean tools with water immediately after use. Drying time: approx. 6-8 hours under normal conditions (+20 °C, 65% relative humidity, moderately absorbent substrate); longer drying time in unfavourable conditions. Tinting: With suitable universal tinting concentrates or full-tone and tinting paints (up to max. 10% addition, without impairing the physical properties of the overall coating. It is essential to ensure light and weather fastness). Notes on airless spray application: Spray angle: 50° Nozzle: 0.023 - 0.027 Spray pressure: 120 - 180 bar
Consumption
Smooth surfaces/fine plaster grain → from 150 ml/m² Determine exact consumption quantity by test coating on the object.
Storage
Keep container tightly closed in a cool but frost-free place. If unopened and stored properly, shelf life is at least until: see batch label.
Notes
Processing temperature: +5 °C to +30 °C for material, circulating air and substrate Do not cover surfaces to be painted. Keep out of reach of children. Ensure adequate ventilation during application and drying. Do not inhale spray mist. Avoid eating, drinking and smoking while using the paint. Wear safety goggles. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not allow to enter drains, waterways or soil. Only dispose of empty containers for recycling. caution! Hazardous respirable droplets may be produced when spraying. Do not inhale aerosol or mist. Use combination filter A2/P2 when spraying.
